SnapSense NB-IoT skynjarar
Tilbúnir skynjarar til vöktunar á hurðum, hita, raka og magni.
Contact us todayReal-time monitoring
Linked with lock events
Smart alerts
CER/NIS2 compliance
Real-time door monitoring
Know the exact status of every door — open or closed — at all times. NB-IoT sensors report instantly without gateways.
Lock event correlation
Sensor data is automatically matched with lock events. Unmatched openings are flagged as potential unauthorized access.
Smart alerting
Configure alarm rules for unauthorized openings, tamper detection or doors left open. Reduce false positives with intelligent filtering.
Compliance-ready reporting
Export event logs, incident timelines and audit trails. Ready for CER and NIS2 documentation requirements.
How SnapKey Sensors work
Install
Mount the NB-IoT sensor on the door. Plug-and-play — no wiring or gateway needed.
Monitor
The sensor reports door open/close events in real time. Data is combined with lock events in the dashboard.
Alert
If an unauthorized opening is detected, alarms trigger instantly. Smart rules reduce false positives.
Report
Export event logs, incident timelines and compliance reports. Ready for CER/NIS2 audits.
Typical use cases
Critical infrastructure
Monitor access to substations, pump stations and telecom sites. Full traceability for CER/NIS2.
Warehouses & logistics
Detect unauthorized door openings after hours. Link with lock events for clear cause and effect.
Offices & common areas
Know which doors are left open. Get alerts before it becomes a security issue.
Configure once, monitor always
Set up sensors, alarm rules and notification thresholds in the dashboard. Changes apply immediately.
Assign sensors to doors and locks
Configure alert rules and thresholds
Set arm/disarm schedules
Manage notification recipients
Auto-disarm on authorized unlock
Insights when it matters
Real-time door status, incident timelines and activity analytics — all in one place.
Live door open/closed status
Incident timeline with linked lock events
Battery and signal health monitoring
Activity analytics by time of day
Export compliance reports
Hvað þú færð með SnapKey skynjurum
Greining á opnum/lokuðum hurðum
IoT-skynjarar skrá nákvæmlega hvenær hurð er opnuð eða lokuð — bæði fyrir heimilaðar opnanir og óheimilar tilraunir.
Tengt við lásagögn
Upplýsingar frá skynjurum eru sameinaðar aðgangsatburðum SnapKey, svo þú veist alltaf hvers vegna og hvernig hurðin var opnuð.
Viðvaranir um opnar hurðir
Fáðu tafarlausar viðvaranir ef hurð er skilin eftir opin of lengi — dregur úr hættu á innbroti eða niðurtíma.
Innbrotsgreining
Þegar óheimilaðar opnanir greinast getur kerfið ræst viðvörun og skráð atburðinn til rannsóknar.
Full skjölun og samræmi
SnapKey skynjarar auðvelda samræmi við CER og NIS2 með því að skrá alla aðgangsatburði með tíma, dagsetningu og orsök.
Frequently asked questions
No. SnapKey Sensors use NB-IoT (cellular) and are completely wireless. Just mount and they connect automatically.
The system matches door open/close events with lock/unlock events by time and location. Unmatched openings are flagged as unauthorized.
Yes. You can configure alarm rules that trigger on unauthorized openings, tamper alerts, or doors left open too long.
NB-IoT sensors typically last 3-5 years on a single battery. The dashboard monitors battery levels and alerts when replacement is needed.
Yes. Full event logging, audit trails and exportable reports make it straightforward to document access control for CER and NIS2.
Full control over every access point
Combine lock events with sensor data for complete door monitoring. Real-time alerts, compliance reports and actionable insights.
Contact us today